Troy-bilt STORM TRACKER 2690XP User Manual download pdf (Page 18)

Drive Control





tight.

NOTE: If excessive slack is present in the drive cable or if the snow



the cable may be in need of adjustment.

Check the adjustment of the drive control as follows:

With the drive control released, push the snow thrower 

gently forward. The unit should roll freely.

Engage the drive control and gently attempt to push the 2.

snow thrower forward. The tracks should not turn. The unit

should not roll freely.

With the drive control released, move the shift lever back 3.



several times. There should be no resistance in the shift

lever.

If any of the above tests failed, the drive cable is in need of



Shut off the engine as instructed in the separate engine 

manual.

2.

fitting.

3.





pliers and tighten the jam nut against the ferrule.

Rotate the coupling end of the cable counterclockwise to 

provide more slack or clockwise to decrease the slack in the

cable.

5.

Check the adjustment of the drive control as described 

above to verify proper adjustment has been achieved.

Chute Directional Control

To adjust the chute control rod, proceed as follows:

Remove the cotter pin from the hole closest to the chute 

assembly on the chute rotation assembly.

2.

with the second hole in the chute rotation assembly. See



Reinsert the cotter pin through this hole and the chute 3.



Off-Season Storage

If the snow thrower will not be used for 30 days or longer, follow

the storage instructions below.

Run the engine until the fuel tank is empty and it stops due 

to lack of fuel. Do not attempt to pour fuel from the engine.

Lubricate the machine as instructed earlier in this section.2.

Store in a clean, dry area.3.

If storing the snow thrower in an unventilated area, 

rustproof the machine using a light oil or silicone to coat

the snow thrower.

Clean the exterior of the engine and the snow thrower.5.

NOTE: 

storing your engine.





18 se c t i O n 6— Ma i n t e n a n c e & ad j u s t M e n t s

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 51 52

Comments to this Manuals

No comments

Troy-bilt STORM TRACKER 2690XP User Manual Page 18

Comments to this Manuals

Related products and manuals for Cars Troy-bilt STORM TRACKER 2690XP