Troy-bilt STORM TRACKER 2690XP User Manual download pdf (Page 16)

Maintenance

Engine



Shave Plate and Skid Shoes

The shave plate and skid shoes on the bottom of the snow

thrower are subject to wear. They should be checked periodically

and replaced when necessary.

NOTE: Deluxe skid shoes have two wear edges. When one side



To remove the skid shoes:

Remove the four carriage bolts and hex flange nuts which 

secure them to the snow thrower.

Reassemble the new skid shoes with the four carriage bolts 2.



To remove the shave plate:

Remove the carriage bolts and hex nuts which attach it to 

the auger housing.

Reassemble new shave plate, making sure heads of 2.

carriage bolts are to the inside of housing. Tighten securely.



Lubrication

Gear Shaft

The gear (hex) shaft should be lubricated at least once a season

or after every twenty-five (25) hours of operation.

Run fuel tank dry, then carefully pivot the snow thrower up 

and forward so that it rests on the auger housing.

Remove the frame cover from the underside of the snow 2.

thrower by removing the self-tapping screws which secure



3.



NOTE: When lubricating the hex shaft, be careful not to get

any oil on the aluminum drive plate or the rubber friction



system. Wipe off any excess or spilled oil.

NOTE: Augers not shown for clarity



NOTE: Tracks removed for clarity









Maintenance & Adjustments

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 51 52

Comments to this Manuals

No comments

Troy-bilt STORM TRACKER 2690XP User Manual Page 16

Comments to this Manuals

Related products and manuals for Cars Troy-bilt STORM TRACKER 2690XP