Safety • Assembly • Operation • Adjustments • Maintenance • Troubleshooting • Parts Lists • WarrantyWarning: This unit is equipped with an internal c
10Gas & Oil Fill-Up Service the engine with gasoline and oil as instructed in the Tecumseh Engines manual packed separately with your snow thrower
11To Engage Drive1. With the throttle control in the Fast (rabbit) position, move shift lever into one of the six forward (F) positions or two revers
125Making AdjustmentsAuger ControlRefer to Auger Control Test in Operation section to adjust the auger control.Shift CableIf the full range of speeds
135Making AdjustmentsWARNINGLoose gravel can be picked up and thrown by the auger, causing injury to the operator and by-standers and/or damage to the
146Maintaining Your Snow ThrowerWARNINGBefore lubricating, repairing, or inspecting, disengage all controls and stop engine. Wait until all moving par
156Maintaining Your Snow ThrowerAuger Belt ReplacementTo remove and replace your snow thrower’s auger belt, proceed as follows:1. Remove the plastic
16Augers• The augers are secured to the spiral shaft with two shear pins and cotter pins. If the auger should strike a foreign object or ice jam, the
17Friction Wheel RemovalIf the snow thrower fails to drive with the drive control engaged, and performing the drive control cable adjust-ment fails to
18Preparing EngineNOTE: Refer to the engine manual for more detailed information on preparing the snow thrower engine for storage.Short-Term StorageIt
23This section addresses minor service issues. For further details, contact an authorized service center.8Trouble- shootingCauseProblemRemedyEngine fa
2Finding and Recording Model NumberPlease do NOT return the unit to the retailer from which it was purchased, without first contacting Customer Suppor
209 1943675674503953274641444740491520453262492858122371454118524855513843313335112794434333121332930162557133310322242376Style N
219Illustrated Parts ListTo order replacement parts, call 1-800-648-6776 or visit www.troybilt.com1. 731-2635 Snow Removal Tool Mount2. 684-0405
22Style N
239Illustrated Parts ListTo order replacement parts, call 1-800-648-6776 or visit www.troybilt.com1. 631-04133 Handle Assembly, Lock, LH2. 631-04134
24Style N121225353506242396340333024361852537196317302426132345474423432753424 305158526135277145548467595949412111466ABBA8261664729173954605756602010
259Illustrated Parts ListTo order replacement parts, call 1-800-648-6776 or visit www.troybilt.comWheel Assembly Side Wheel Size Rim Only Tire Only
NOTES26
NOTES27
The limited warranty set forth below is given by Troy-Bilt LLC with respect to new merchandise purchased and used in the United States and/or its terr
31Safety LabelsWARNINGThis symbol points out important safety instructions which, if not followed, could endanger the personal safety and/or property
42Safe Operation PracticesTraining1. Read, understand, and follow all instructions on the machine and in the manual(s) before attempting to assemble
5Operation1. Do not put hands or feet near rotating parts, in the auger/impeller housing or chute assembly. Contact with the rotating parts can amput
63Setting Up Your Snow ThrowerReferences to the right or left side of the snow thrower are determined from behind the unit in the operating position (
73Setting Up Your Snow Thrower6. Remove the flat washer and hairpin clip from the end of the chute directional control, Figure 3-5. Insert the end o
84Operating Your Snow ThrowerNow that you have setup your snow thrower, it’s important to become acquainted with its controls and features.NOTE: For
94Operating Your Snow ThrowerWARNINGThe operation of any snow thrower can result in foreign objects being thrown into the eyes, which can damage your
Comments to this Manuals