Troy-bilt 47330 User Manual download pdf (Page 7)

Section 2: Assembly

J

STEP 4: AHACH HANDLE

1. Using two 7/16" wrenches, remove the

handle (F, Figure 2-3) and discard the

screv№ and nuts. Turn the handle over

and position it as shown in Figure 2-3.

The bend in the handle must face upward

as shown.

2. Insert one 1/4“-20 x 1-1/4" flange head

screw (G, Figure 2-3) down through the

forward holes in the shredder hopper and

handlebar. Loosely add one 1/4“-20

toplock nut (H). Repeat on the other side.

3. Install the remaining two screws (I)

and nuts (H). Tighten all four screws and

nuts with 3/8" and 7/16’ wrenches.

STEP 5: INSTALL CLUTCH LEVER

1. Insert the angled end of the upper

clutch lever section (J, Figure 2-4) up

through the hole in the lip of the shredder

hopper. Slide the vinyl grip (K) onto the

handle.

2. Turn the lever so that the handle faces

inward, as shown in Figure 2-4. Attach

the lever top section (J) to the lever

bottom section (L) using two 1/4'-20 x

3/4" screws (M) and 1/4"-20 toplock nuts

(N). Tighten securely.

Figure 2-4: Cottuect top section (J) of clutch

lever to bottom section (L).

STEP 6: ADD MOTDR OIL TO ENGINE

Refer to the separate Engine Owner’s

Manual (included in the unit’s literature

package) for correct oil specifications and

capacities.

IMPORTANT: The unit is shipped without

oil in the engine crankcase. Do not start

the unit without first adding oil to the

engine. Severe damage will result if the

engine is run without oil.

1. Make sure the engine is level.

2. Add motor oil according to the instruc

tions provided in the engine manufac

turer’s Engine Owner’s Manual.

STEP?: CHECK HARDWARE FOR

TIGHTNESS

Inspect the screws, nuts and bolts on the

unit and tighten any loose hardware.

IMPORTANT: This completes the assem

bly steps. Be sure to read the rest of this

Manual, and the separate Engine Owner’s

Manual, before you attempt to operate

your chipper/shredder.

1 2 3 4 5 6 7 8 9 10 11 12 ... 26 27

Comments to this Manuals

No comments