Troy-bilt 52063 User Manual download pdf (Page 9)

Features and Controls

3

Section

7

OPERATING SYMBOLS

Various symbols (shown here, with

word descriptions) are used on the

unit.

STOP

FEATURES AND CONTROLS

This Section describes the location and

function of the features and controls on

your machine. Refer to the following

Operation Section for detailed operating

instructions.

IMPORTANT: Refer to the engine manual

for detailed information about the con-

trols on the engine.

Trimmer Head Control Bail

Pull the control bail (A, Figure 3-1) up

against the handlebar (engage bail) to

start rotation of the trimmer head. Let go

of the control bail (disengage bail) to

stop the trimmer head.

Cutting Height Settings

The trimmer head (B, Figure 3-1) is

adjustable to an infinite number of height

settings from 1-1/2" -to- 4-1/2".

Trimmer Line Holders

The trimmer lines are secured to line

holders (C, Figure 3-1). Replacing the

trimmer lines is a simple procedure (see

“Changing Trimming Lines” in Section

5).

Handlebar Height Adjustment

The handlebar (D, Figure 3-1) has two

height settings (see “Adjust Handlebar

Height” in Section 4).

Plastic Debris Shield

The plastic debris shield (E, Figure 3-1)

protects the engine from all manner of

debris. The shield tilts forward for

access to the engine.

Engine Throttle Control Lever

Use this lever (F, Figure 3-1) to regulate

engine speed and to stop the engine. The

throttle settings are shown on the decal

next to the lever.

Engine Recoil Starter

The recoil starter (G, Figure 3-1) is

located at the rear of the engine and is

used to pull start the engine.

Fuel Primer Button

The fuel primer button (I, Figure 3-2)

allows a cold engine to be primed for

faster, easier starting.

Keyswitch

The keyswitch (J, Figure 3-1) activates

the starter motor to start the engine. The

keyswitch does not have an engine stop

position. Use the Engine Throttle Control

Lever (F) to stop the engine.

IMPORTANT: Remove key from

keyswitch when leaving unit unattended

to help prevent unauthorized or uninten-

tional starting.

Battery

The battery (K, Figure 3-1) cranks the

engine starter motor when the keyswitch

is turned to the start position. Do not

crank engine longer than five (5) seconds

per each starting attempt.

ENGINE

STOP

TRIMMER

HEAD

ENGAGE

BAIL

DISENGAGE

BAIL

SLOW

FAST

STOP

Figure 3-1: Features and controls (electric start model shown).

J

C

B

G

K

F

A

E

I

D

Before operating your machine, care-

fully read and understand all safety,

controls and operating instructions in

this Manual, the separate Engine

Owner’s Manual, and on the decals on

the machine.

Failure to follow these instructions can

result in serious personal injury.

WARNING

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 23 24

Comments to this Manuals

No comments